3M double-sided adhesive is widely used in computers, mobile phones, communications, household appliances, audio-visual equipment, automobiles and other products, should be selected according to the application of products and environmental needs, you can refer to the following instructions:
1, non-woven substrate double-sided adhesive and good processability, general long-term temperature resistance 70-80 °C, short-term temperature resistance 100-120 °C, thickness is generally 0.08-0.15MM, suitable for nameplate, plastic lamination, automobiles, mobile phones, electrical appliances, sponge, rubber, signage, paper, toys and other industries, home appliances and electronic instrument parts assembly, display lenses.

2, no substrate double-sided adhesive has excellent bonding effect can prevent shedding and excellent waterproof performance, good processability, good temperature resistance, short-term temperature resistance 204-230 °C, general long-term temperature resistance 120-145 °C, thickness is generally 0.05-0.13MM, suitable for the bonding of inscription plates, panels, decorative parts.

3, PET substrate double-sided adhesive temperature resistance is good, shear resistance is strong, generally long-term temperature resistance 100-125 °C, short-term temperature resistance 150-200 °C, thickness is generally 0.048-0.2MM, suitable for the bonding of inscription plates, LCD, ornaments, decorative parts.

 4, foam substrate double-sided adhesive has soft, good conformability, initial stickiness and good stickiness, solvent resistance and UV resistance, general thickness of 0.4-1.0MM, short-term temperature resistance 130-150 °C, long-term temperature resistance 80-93 °C, suitable for air conditioners, office furniture, communication product bonding, can replace the screw fixing design, so that the product is more beautiful.

5, hot melt adhesive film has good consistency, uniform bonding thickness, no solvent, easy to process, good adhesion to many objects, thickness of 0.1MM, color is translucent / amber, hot melt softening temperature 116-123 °C. Suitable for the bonding of nameplates, plastics, hardware; bonding on the surface of uneven objects can also obtain good results, Dongguan Yushun Plastic Electronics Co., Ltd. recommends that the initial bonding conditions are: temperature 132-138 ° C, bonding time 1-2 seconds, pressure of 10-20 pounds / square inch.